REMKO ML 260 - Manual (Page 8)

8
Fin button The air outlet fins are individually set with this button. You can select 5 positions and an os-
cillating function.
Functional process
Swing button
The oscillating function of the air outlet fins is set with this button. This enables you to im-
mediately switch between a set position and the oscillating function. The swing function im-
proves the air distribution in the room.
Swing Swing Swing
Functional process
Sleep button With this button, programming is activated that increases the target temperature by 1°C
after one hour and 2°C after two hours when the unit is in cooling mode. The unit automati-
cally switches off after 8 hours.
Functional process
Sleep Sleep Sleep
Timer buttons The unit is programmed to automatically switch on or off with this button. By pressing the
timer on or off button, the timer is activated and the time display disappears. The timer
symbol for the timer on or off time blinks. The timer display of the indoor unit is illuminated.
By pressing the HR. and MIN. buttons, the desired timer on or off time is set. Once the set-
ting is made, the timer symbol blinks for another 30 seconds.
If the programmed time is reached, the unit automatically switches on or off. If the indoor
unit automatically switches on, the last mode, temperature and fan speed settings are acti-
vated.
To deactivate the timer on or off function prior to its activation time, press the correspond-
ing timer button or the ON/OFF button.
Functional process
Timer On
Timer On 30 sec. Programmed
time reached HR. / MIN.
Unit in
operation
Timer Off
Timer Off 30 sec. Programmed
time reached HR. / MIN.
Unit is off
Timer On and Off Example:
The control mechanism switches on at 10:20 AM
The unit operates until 5:00 PM.
The control mechanism switches off at 5:00 PM.
The unit is off until 10:20 AM.
The control mechanism switches on at 10:20 AM Once the unit is programmed, the con-
trol mechanism immediately switches
the unit off. The control mechanism
switches the unit on every day at the
programmed time. When the unit is on,
all settings are visible on the display.
When the unit is off, only the timer
settings are visible. Unit on Unit off