REMKO WLT 25 - Manual (Page 5)

Transportation and
packaging System configuration
System description
The unit is designed for a
2-conductor system. The system
has 2 medium pipes (conductors:
supply and return flow) for cooling
using a cold medium or heating
using a warm medium.
In cooling mode the combined
cooling register / heating register
in the indoor unit extracts the heat
from the room air by absorbing
it into the operating medium.
A circulation pump transports
the heated medium to a chiller
which extracts the heat from
the medium in an evaporator and
then passes it on to the outside air
via a cooling cycle in a condenser.
The cooled operating medium is
then fed in once again to the unit
medium circuit.
With 2-pipe systems, which
are used for cooling or heating,
the heating capacity can be
provided through a chiller with
heat pump function or through
a boiler and fed into the circuit.
In heating operation the indoor
unit can deliver the heat from
the operating medium
to the room air.
The system is shipped in sturdy
transport packaging. Immediately
check the system on delivery and
make note of any damage or miss-
ing parts on the delivery note and
inform the forwarding agent and
your contractual partner.
Warranty claims at a later date will
not be accepted.
Intended use
Depending on the model and
the equipment, the units are only
intended to be used as a fan coil
in a 2-pipe-system to cool or heat
up rooms by the medium water
or a water-glycol mixture within a
closed cycle.
Any other use or use in a way that
dose not conform with the defini-
tion above is considered an incor-
rect use. The manufacturer/supplier as-
sumes no liability for damages aris-
ing from the incorrect use of the
system or any part of it. The user
dose so at their own risk. Using the
system correctly means working
in accordance with the operating
manual, installation instructions
and complying with the mainte-
nance requirements.
System configuration
Indoor area 1 Indoor area 2 Indoor area 3
Cabled remote control
Chilled water
user
Chilled water
user
Chilled water
user
Condensate drain Condensate drain Condensate drain
Chilled water system
Medium inlet
Medium outlet
Outdoor area
Infrared remote control Infrared remote control
Condensate line (only
units with HP-function)
Condensate
collecting
drain
5