REMKO WLT 25 - Manual (Page 10)

SWING key
The "SWING" key enables the swinging or locking of the oscillating
fins. This improves the distribution of the cooled air inside the room
when switched on ( ). The unit enables an automatic vertical air
distribution and, in addition, horizontal air distribution through manual
setting of the vertical fins.
SWING SWING SWING SWING SWING
SLEEP key
The room temperature is increased by 1 °C one hour after the start
of this function by actuating the "SLEEP" key. To cancel this function
the "SLEEP" key must be pressed anew. The ( ) symbol disappears
and the normal display appears.
SLEEP SLEEP
°C - °F conversion
The setting of the unit allows the display to show both °C and °F.
The standard setting is programmed as °C at the factory.
q TMP
and
p TMP
Short-term
°C
°F
Short-term
CANCEL key
The programmed switch-on or switch-off time can be reset by actuating
the "CANCEL" key.
CANCEL
AUTO
AUTO AUTO
q TMP
and
p TMP
REMKO WLT
10