REMKO WLT 25 User Manual
Page 11
TIMER KEY
The "Timer" keys are used for programming a switch-on or switch-off
delay. If the air conditioning unit should be switched on with a time
delay then press one of the keys whilst the remote control is switched
off. If the air conditioning unit should be switched off with a time delay
then press one of the keys whilst the remote control is switched on.
With both operational conditions a time period appears in the lower
display. The desired time period can be reduced in one hour steps
with the "q TM" key or increased with the "TM p" key. The mode,
the desired temperature and the fan speed from the last setting are
adopted with the programming of the switch-on time delay.
The time span is reduced from this point in time. Once the time
has elapsed the unit switches on or off automatically.
The timer can be cancelled with the "CANCEL" key, through pressing
the "ON/OFF" key twice or by resetting the remaining time to "0".
Switch-on delay
Switch-off delay
q
TM
or
p
TM
Switch-on delay
p
TM
p
TM
.........
p
TM
q
TM
or
p
TM
Switch-off delay
p
TM
p
TM
.........
p
TM
There are individually adjustable fins for adjusting the horizontal air distribution on the air outlet side.
Manual air distribution
Moving interior parts such as
the fan may to cause injury
during operation!
Only make adjustments after
swing operation has been
turned off.
CAUTION
Shift lever left
Manual air distribution
Shift lever right
AUTO
AUTO
AUTO
11