Orion System Lead Controller - Manual (Page 37)

Lead/Lag Controller Technical Guide
Section 11: Saving and Restoring Setpoints
37
Figure 70: Setpoints Menu
Reset Factory Defaults & Save to File
Reset Factory Defaults
WARNING: resets ALL settings and
confi gurations back to the original defaults. Use this option
with extreme caution!
From the top toolbar of the Lead/Lag Controller Status Screens
(Figure 8 & 9, pages 11 & 12), click on
, and then
click on . See Figure 70.
The following warning will appear (Figure 71). Click if you
do not want to reset the defaults. Click if you want to reset
to the defaults.
Figure 71: Reset Defaults Warning
Saving Lead/Lag Setpoints
You can save all setpoints to a fi le on your computer for use in restor-
ing or for copying to another specifi c controller.
From the top toolbar of the Lead/Lag Controller Status Screen, click
and then click . See Figure 72.
Figure 72: Setpoints Menu - Save To File
In the File Save Window (Figure 73), give the setpoint fi le a name
and then click
.
Figure 73: File Save Window