Orion System Lead Controller - Manual (Page 10)

Section 3: Lead/Lag & 2 Lead/1 Lag Navigation & Status
Lead/Lag Controller Technical Guide 10
Selecting and Naming Lead/Lag Controllers
Selecting Lead/Lag Controllers
NOTE: See the Prism 2 Technical Guide for instructions on
setting up the job site and doing a search for units.
From the Prism 2 Main Screen, click on the Lead/Lag Controller
address in the Unit Selection Window. In this example, it is address
3. See Figure 6.
Figure 6: Prism 2 Main Screen Lead/Lag Controller Selection
Naming Lead/Lag Controllers
If you have more than one Lead/Lag Controller, you can rename it in
the Selected Name Dialog Box. See Figure 7. Many users name their
Lead/Lag Controller according to the application that it performs.
Figure 7: Naming the Lead/Lag Controller
Selected Name Dialog Box
Unit Selection