On-line power – OnLine Power Phase Stabilizer User Manual
Page 37
On-Line Power
6002-032 REV H
2-9
2-4 MOUNTING
The Phase Stabilizer, sizes 15 to 75 kVA, and the CP 18 are equipped with leveling jacks to provide firm footing
when the unit is set in its permanent location. With the leveling jacks in place, the unit cannot roll on the
wheels. If local code requires the unit to be more firmly secured, mount the unit to the floor using angle
brackets. A seismic option is available to mechanically attach the unit to the floor.
The Power-Reg, Ultra-Reg and Phaze Stabilizer, sizes 100 to 400 kVA, are equipped with angle-iron feet that
have four 9/16-inch diameter holes pre drilled for mounting. Units can be bolted to the floor using these
mounting holes. And single phase (10-100kVA) Power-Reg are also equipped with angle-iron, use same
mounting procedure as larger KVA units.
TOP VIEW
FRONT VIEW
FRONT PANEL
(HALF OPEN)
FRONT
DOOR
22"(54)
54"(200)
15"
(38)
SIDE VIEW
NOTE:
ALL DIMENSIONS ARE
IN INCHES (CENTIMETERS)
INDICATES AIR FLOW
42"(107)
59"(150)
PHASE STABILIZER (15 - 75 KVA) AND CP 18 CLEARANCES
ILLUSTRATION 2-3