OnLine Power Phase Stabilizer - Manual (Page 29)

On-Line Power
6002-032 REV H 2-1
SECTION 2 – PREINSTALLATION
2-1 LOCATION CONSIDERATIONS
OPERATING ENVIRONMENT. Provide an operating environment which meets the following conditions:
• AMBIENT TEMPERATURE
32° to 104° F
0° to 40° C
• RELATIVE
HUMIDITY
Power-Reg, Ultra-Reg, Phase Stabilizer: 10% to 90% (noncondensing)
Constant Power 18: 5% to 95% (noncondensing)
POSITIONING. Position the unit so that the regulating electronics are not obstructed by objects that could make
servicing the unit difficult. Allow minimum service access clearances as defined in Illustrations 2-3 and 2-4.
This unit is air cooled by convection. Do not block air flow from the front, rear, or bottom of the unit.