OnLine Power Telecommunication - Manual (Page 32)

OnLine Power
3-2
REV A
3-3 PBC-II STORAGE
• The batteries are installed in the PBC-II. For details of battery shelf time read appendix C.
• Provide a protected environment that meets the environmental limits listed below.
• Storage and Transport Temperature Range is - 40
o
C to +60
o
C
• Relative humidity: 0 % to 95 % non-condensing (inside cabinet).
WARNING!
BATTERY SHELF LIFE!
WHEN STORED UNDER TEMPERATURE CONDITIONS OF 66 DEGREE F - 90
DEGREE F, IS FIVE (5) MONTHS MAXIMUM AFTER THE SHIP DATE.
• For the BATTERY SHELF LIFE DETAILS read Appendix C.
3-4 PBC-II INSTALLATION
Installation of PBC-II has the following steps:
• The unpacking of PBC-II covered in section 3.1 & 3.2.
• The PBC-II installation and mounting.
• Connecting of conduit to PBC-II cabinet
• Connecting DB-9 to control panel.
• Wiring input power to unit at TB-1.
• Wiring output power from unit at TB-1.
• Powering up the PBC-II unit & testing it.
• Power up the output circuits & check loading.