OnLine Power Telecommunication - Manual (Page 29)

OnLine Power
2-1
REV A
SECTION 2 - PREINSTALLATION
2-1 SITE PLANNING AND PREPARATION
• Provide an operating environment that meets the following conditions:
• Ambient Temperature is 0 0
C to 40 O
0
C ( 32
0
F to 104 O
0
F )
• Relative Humidity is 10 to 95 % Non-Condensing.
2-2 Positioning
• Door shall have full 110 degrees open clearance, and have 5 feet clearance in front for bucket or
platform.
CAUTION DANGER!!
• Inspection Safety Zone of Tray is 6 inches. Pass that point, the tray needs support, due to weight.
• The Electronic Tray weight is approximately 55 lbs.
• Each of the eight Battery weight is 82 lbs (for a total of 656 lbs. for 8 batteries).
• The PBC-II weight is approximately 892 to 899 lbs.
2-3 Site Planning Specifications
DC Mode:
NOMINAL INPUT VOLTAGE 208 VAC 230 VAC 120 VAC 220 VAC 240 VAC
Input Voltage Range 180-264 180-264 85-130 180-264 180-264
Max. Input Voltage 264 VAC 264 VAC 130 VAC 264 VAC 264 VAC
Input Frequency 60 60 60 50 60
Output Frequency 60 +/- 0.5% 60 +/- 0.5% 60 +/- 0.5% 50 +/- 0.5% 60 +/- 0.5%
*Output Voltage 230V +/-3% 230V +/-3% 120V +/-3% 230V +/-3% 230V +/-3%
*Output voltage vary and follow the input voltage in normal AC mode operation.