Nortec NH-EL Series - Manual (Page 64)

61 | Maintenance and Servicing
Service Submenu
Cylinder A/B Reset
The humidifier uses information about cylinder replacement to optimize
the performance of the humidifier. Only after replacing a cylinder select
Reset Cylinder, and then press the Yes button.
Drain Cylinder
Allows the user to drain the cylinder(s). Select the cylinder(s) that should
be drained and press the checkmark. To interrupt draining press cancel.
Fault / Service History
Displays the fault / service events that have been recorded by the
humidifier.
Reset Fault/Service History
Deletes the list of Faults/Service events stored in the Fault / Service
history. Resetting the fault / service history is not normally required, but
can be done after repairs to remove faults that are no longer needed.
Export History
Allows export of the service history to a USB memory stick plugged into the
humidifier controller USB port. The file can be sent to Nortec for analysis.
Input Diagnostics
Displays a list of the humidifier’s inputs and the current status/value.
Output Diagnostics
Displays a list of the humidifier’s components and remote indication relays. The components
and relays can be activated for diagnostic purposes.
Admin Submenu
Setpoint Password
Yes = The humidifier will prompt a user for a password in order to change
the setpoint from the main status screen. No = allows any user to change
the setpoint from the main status screen without a password. (Default =
Yes)
Main Menu Password
Sets whether a password is required to access the main menu. No =
pressing Menu on the main status screen opens the Main menu without
requesting a password.
Software Update
Initializes a software update from a USB memory stick plugged into the humidifier controller
USB port.