NavCom SR-7120 Rev.A - Manual (Page 89)

Safari Network User Guide
5-1
Chapter 5 Monitoring & Changes
After you have configured your network services and
added units to the network (as described in Chapter 4),
you may occasionally need to monitor network usage
and make changes to your network configuration. Here
you will find descriptions of procedures for displaying
network information, removing network services and
components, and modifying configuration parameters.
This chapter describes version 3.3.0 of the configuration
software.
Displaying Network Information
The Safari Network configuration software enables you to
display current configuration information as well as real
time network usage information from the Network
Management Menu.
To access the SR-7100 Network Management Menu:
1. Launch a terminal program (such as HyperTerminal)
on the computer.
2. Turn on the NCU through the Port Expander. Within
10 seconds, type the word “admin” and press the
Enter key.
3. At the NCT SR-7100 Admin Page, select:
1. Network Management Menu
by typing 1 and pressing the Enter key.
Real Time Network Usage information is very useful to
monitor the health of the whole network and diagnostics
for network abnormality. It is recommended to reserve
COM2 port on the NCU for network management
displaying real time RU status and to change network
configuration if required.