beautypg.com

Providing power through the j1 connector – NavCom SR-7120 Rev.A User Manual

Page 53

background image

Safari Network User Guide

3-7

UP

Providing Power through the J1 Connector

This configuration, recommended for Remote units in
vehicles, requires the use of the Port Expander

without the

DIN connector for power input.

1. Mount the radio unit in the selected location per your

site planning. If using the internal antenna, be sure to
mount the unit in the position shown in Figure 3-6
below, with the omni-directional radiation pattern
along the horizontal plane.

Figure 3-6: Correct Mounting Position for Internal Antenna