beautypg.com

Configuring as an ncu – NavCom SR-7120 Rev.A User Manual

Page 65

background image

Safari Network User Guide

Configuring as an NCU

The SR-7100 radio defaults to an RU (Remote Unit). Before
you can use the radio as an NCU, you need to configure it
as an NCU.

Initiate a HyperTerminal program and turn the radio ON
through the Port Expander. Within 10 seconds, type the
word “admin” in the HyperTerminal window and press
the Enter key. The Admin Page appears like the following:

Image 4-1: Admin Page

2. Software Download Only for use in
upgrading Firmware. See additional Read Me files
issued with any upgrade for specific instructions
and download procedure.

3. Diagnostics For use in trouble-shooting and
for obtaining certain performance parameters.
See Appendix on Diagnostic Tools for detailed
information (Future).

4-3