NavCom SR-7120 Rev.A - Manual (Page 63)

Safari Network User Guide
4-1
Chapter 4 Configuration
Once you have planned your network installation and
configuration, as discussed in Chapter 2, and physically
installed your network components, as discussed in
Chapter 3, you can specify services and configure the
NCU, RU and SCU components to deliver the services
you require.
This chapter describes version 3.3.0 of the configuration
software.
The configuration software discussed in this chapter
is text menu-based. A graphical, browser-based
software interface—for networks configured as a
wireless Ethernet LAN—may be available in a later
release.
HyperTerminal Program Interface
HyperTerminal is a text–based communication program
that can be used for sending Administrative commands to
the SR-7100 radio. HyperTerminal Private Edition 6.3 (or
higher), which has the best compatibility among different
operating system platforms, is recommended. The
program can be downloaded for free from
www.hilgraeve.com/htpe/download.html .