NavCom SR-7120 Rev.A - Manual (Page 102)

Safari Network User Guide
Possible Cause Corrective Action
A-4
The radio’s output
power is
insufficient. Reconfigure the RU’s output power from
the NCU, using the maximum setting (63).
Confirm that the NCU’s output power is
also maximized, and do the same for any
SCU configured between them.
To configure an NCU, refer to
Chapter 4: Configuration.
To configure an SCU, refer to
Chapter 4: Configuration.
To reconfigure an RU, refer to
Chapter 5: Operation.
Transmit and
receive antennas
are cross
polarized. Reposition the units and/or external
antennae so that they are all oriented
properly and perpendicular to the ground.
The radio was
configured with
an incorrect ID. Check the physical ID of the radio.
Reconfigure the RU so that the correct
physical ID is used.
To reconfigure an RU, refer to
Chapter 5: Operation.
The radio’s ports
and channel
assignments were
not configured
properly. Review the port assignments of all RUs to
verify that each source and destination
channel IDs match up.
To review port assignments, refer to
Chapter 5: Operation.
To assign channel Ids, refer to
Chapter 4: Configuration.