NavCom LAND-PAK Rev.E - Manual (Page 90)

LAND-PAK
™ User Guide – Rev. E
5-88
Reset RTK Filters
This feature is used to reset the Kalman filter and
ambiguity resolution process when RTK performance
is suspected to be in error.
Follow these steps to reset the RTK filters:
1. Open FieldGenius and select an existing project
or create a new project (see the Field Genius
User Guide for detailed instructions).
2. On the Instrument Selection dialog box (refer to
Figure 40), select GPS Rover.
3. Click Connect to connect to the SF-3040.
4. On the Link Configure dialog box (refer to Figure
41), select StarFire.
5. Click Connect.
6. Click .
7. On the Instrument Settings dialog (refer to
Figure 53), click Reset RTK Filters.