NavCom LAND-PAK Rev.E - Manual (Page 62)

LAND-PAK
™ User Guide – Rev. E
4-60
5. Store the two Allen wrenches for future use as
needed.
Figure 22: Mounting Tribrach & Tribrach Adapter
Refer to Figure 22 for the steps below:
6. Mount the tribrach to the top of the tripod as
follows:

Position the tribrach so it fits evenly on the top
plate and is flat.

Screw the tribrach fastener into the tribrach
until it is secure.

The tribrach has a leveling bubble and
three adjustment knobs to make fine
adjustments.
7. Mount the tribrach adapter into the three holes of
the tribrach, and then lock it in place by turning
the knob on the side of the tribrach.
8. Screw the pole extension into the tribrach
adapter. The pole extension provides easier
access to the connectors and exchange of the
batteries on the SF-3040 GNSS receiver.