NavCom LAND-PAK Rev.E - Manual (Page 53)

LAND-PAK
™ User Guide – Rev. E
4-51
Chapter 4 .................. Function Test Setup
This chapter provides a test setup of the LAND-PAK
before field operation to ensure system functionality.
The function test setup involves the following:

Nautiz X7 configuration

Radio modem configuration

Hardware setup
System inventory and battery charging must be
completed before this test setup. Refer to Chapter 2
Inventory Check and Chapter 3 Battery Charging.

The function test setup does not involve
satellite communication. Refer to the
FieldGenius User Guide for instructions
on initializing the system to start
collecting computed positions.
Nautiz X7 Configuration
This section provides steps to initially configure the
Nautiz X7 handheld controller prior to the installation
of the desired software.
1. Remove handheld unit from packaging and
install battery pack.
2. Press and hold power button for two seconds
to allow the unit to boot up. The Windows
Mobile home screen will appear.
3. With the stylus, tap anywhere on the Windows
Mobile home screen.