Figure 78: main menu, Additional setting, Figure 79: error correction and error checking – NavCom LAND-PAK Rev.E User Manual
Page 120
LAND-PAK
™ User Guide – Rev. E
A-118
that will communicate with each other.
If the transmitting radio modem and
the receiving radio modem have
different settings, data will not be
received correctly.
1. Press the down arrow soft key to move the cursor
down the main menu to Additional (see Figure 78).
Figure 78: Main Menu
– Additional Setting
2. Press the Select soft key to select Additional.
a. A submenu is displayed. The cursor points to
Error corr.
Refer to Figure 79 and Figure 80 for the steps below.
3. Press the Change soft key to turn error correction
OFF.
4. Press the down arrow soft key to move the cursor
down the submenu to Error check.
5. Press the Change soft key to turn error checking
OFF.
Figure 79: Error Correction and Error Checking
6. Press the down arrow soft key to move the cursor
down the submenu to SL-commands.
a. Set SL-commands to OFF.