NavCom LAND-PAK Rev.E - Manual (Page 83)

LAND-PAK
™ User Guide – Rev. E
5-81
Figure 46: StarFire Status
Choose an Alternate StarFire Satellite
After logging on to FieldGenius and selecting a
project or creating a new project, follow these steps to
change the StarFire satellite configuration:
7. On the Instrument Selection dialog (refer to
Figure 40), select GNSS Rover.
8. Click Connect to connect to the SF-3040.
9. On the Link Configure dialog box (refer to Figure
41), select None.
10. Click Connect.
11. On the map page, click .
12. On the Instrument Settings dialog (refer to
Figure 47), select StarFire Setup.