MicroE OPS Series - Manual (Page 5)

Page 5
System Overview
OPS ™ Series Encoders
Items Required for OPS Encoder Installation
• Hex wrench (M3.5 for Side Mount, 5/64" or M2.5 for Top Mount)
• Alignment Tool Kit (Model AT-OPS)
• For OPS-SM
- Z height spacer shim (ships with each sensor - 1.00mm (red) for use with tape scales
- 0.83mm (blue) for use with glass scales
• For OPS Top Mount
- Z height spacer shim, ZG-PP1 for tape scales (black)
- Z height spacer shim, ZG-GS1 for glass scales (white)
• Optional: MK-FFA bracket kit for installation into industry-standard mounting hole patterns.
Refer to encoder model data sheets for detailed ordering guide and more information about MicroE
Part Numbers.