MicroE OPS Series - Manual (Page 24)

Page 24
Appendix F
Order Guide
How to Order
All specifications subject to change.
PurePrecision™ Marker Tape II
HPMT – N – A – L – 5000 – I
I = Individual Lengths
C = Continuous reel with index and
cut marks (unless otherwise
specified)
Length in mm (40mm - 30,000mm)
For length >5000mm, contact
MicroE for custom P/N.
OPS-SM-400 – 3 – 1
Cable Length*
1 = 1.0m
3 = 3.0m
5 = 5.0m
Interpolation (Resolution)
20 = x20 (1µm)
40 = x40 (0.5µm)
200 = x200 (0.1µm)
400 = x400 (50nm)
L = Center Index and End Limits
I = Center Index Only
C = Custom
PurePrecision™ Laser Tape II
HPTS – 30000 – N
Length in mm (70mm - 30,000mm)
Limit Outputs
1 = Active Low
2 = Active High
3 = Disabled
MK-FFA
* Custom cable lengths and connectors are available.
Contact MicroE Applications Engineering.
FlexFit Adaptor Mounting Kit. Reference
design is available upon request.
SM = Side Mount
(blank) = Top Mount
End Cap Kit, PurePrecision Tape Scales
EC Optional Tape Scale End Caps
Sensor Scales
Sensor Installation Tools
AT-OPS Alignment Tool Kit for OPS encoders
includes Alignment Tool, SmartPrecision II™
Software, USB Cable, Power Supply (100V-
240VAC, US 2-prong plug)
ZG-PP1 Z-Height Gauge, PurePrecision™ Tape
Scales, Top Mount Sensor
ZG-GS1 Z-Height Gauge, Glass Scales, Top
Mount Sensor
FlexFit™ Adaptor
Stick-on Index and Limit Markers (for Laser Tape II and
Performance and Value Linear Glass Scales)
NRIMS Qty. 8 Stick-On Index Markers
NRLMS Qty. 4 Stick-On Left Limit Markers and Qty. 4
Stick-On Right Limit Markers
Rotary Glass
Contact MicroE Applications Engineering to discuss
your requirements.
Performance and Value Linear Glass
PVGL – 1000 – T
Length in mm (70mm - 1,000mm)**
T = Adhesive backing
** For lengths <70mm or >1m, contact MicroE Applications
Engineering.
TSAT-SM-PPT Tape Applicator Tool for OPS-SM,
Side Mount Sensors
Tape Scale Applicator Tools
(use for lengths >300mm)
TSAT-PPT Tape Applicator Tool for OPS,
Top Mount Sensors
Adaptor for Open Collector Limit Outputs
MIIA-OCL Small DB15 adaptor to convert 3.3V left
and right limit output signals to open
collector type (7407).