Microcom 400 - Manual (Page 97)

Appendix D Quick Reference Command Summary
400 Operators Manual 89
97 Tag/Tear Operation:
0 Turns off tag/tear operation.
1 Advance after every label.
2 Advance after copies count.
3 Advance when idle.
98 Peel-and-Dispense Mode: Section 2.1.2.
0 Turn off peel-and-dispense mode.
1 Turn on peel-and dispense mode.
100 Clear User RAM: This command will clear all downloaded fonts, graphics, and
stored label formats. See Section 5.3.8.
101 Send User RAM Available: The printer will send the number of free bytes to the
serial port (ie. >192480<).