Microcom 400 User Manual
Page 92
Quick Reference Command Summary
Appendix D
400 Operators Manual
84
22
Change SW2: Software dip switch #2. An EEPROM command.
Below is the ^AB sequence:
^ABxxxxxxxx
*******.)))),
******.)))),*
*****.)))),**
*****
RRR
Power-up Label Format
*****
000=ALWAYS EPROM Format 1
*****
001=ROM or Saved Format File 1
*****
010=ROM or Saved Format File 2
*****
011=ROM or Saved Format File 3
*****
100=ROM or Saved Format File 4
*****
101=ROM or Saved Format File 5
*****
110=ROM or Saved Format File 6
*****
111=ROM or Saved Format File 7
****.)))))
1=Use Saved Format File, 0=Rom Format
***.))))))
1=Print Button Enable, 0=Disable
**.)))))))
1=Disable Button Use, 0=Enable
*.))))))))
1=>RESTARTED< Response Enable, 0=Disable
.)))))))))
1=Clear Text Enable, 0=Disable
23
Change SW3: Software dip switch #3. An EEPROM command.
Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******.
Always 0
******.)
Always 0
*****.))
Always 0
****.)))
Always 0
***.))))
Always 0
**.)))))
1=Send Response After a Print
**
0=No Response After a Print
*.))))))
Always 0
.)))))))
1=Disable Extended ASCII, 0=Enable