Microcom 400 - Manual (Page 12)

Features and Specifications Chapter 1
400 Operators Manual 4
1.3 FONTS
! Converted HP LaserJet II™ font compatibility and 8 resident bit mapped fonts, including
OCR-A and OCR-B.
! All Bit Mapped fonts expandable in height and width
! Bit Mapped fonts and bar codes in 0, 90, 180, and 270 degree rotations
1.4 PRINTING
! Optional peel function with label taken sensor and release lever
! Tag/tear mode advances label to the tear bar
! Batch mode printing
! User defined label advancement for special stock or application
! Label back-up in tag/tear and peel modes
1.5 INTERFACE COMMUNICATIONS
! Serial: RS-232C, 9-pin female D-Sub connector (DCE) and 2Kbytes buffer
-Flow control: XON/XOFF, CTS/RTS
-Baud rate: 110 to 19200, user-selectable
-Parity: odd, even or none
-Data bits: 7 or 8
! Parallel (optional): 25-pin female
1.6 PHYSICAL
! Rigid painted steel construction
! Height: 5" (127mm)
! Width: 8.5" (216mm)
! Depth: 10.5" (267mm)
! Weight: 12 LBS (5.44 Kg)
1.7 ENVIRONMENT
! Temperature: 0 " C to 40 " C operating
! Humidity: 10-90% non-condensing