Microcom 400 User Manual
Page 91
Appendix D
Quick Reference Command Summary
400 Operators Manual
83
^A
^D
Command
2
Text string entry mode: Precedes the text strings that are supplied to the
various fields in the label (Equivalent to ^B).
3
Print Command: Prints a single label or starts the printing of a batch of labels.
(Equivalent to ^C)
5
Send Printer Status: (Equivalent to ^E)
11
Print a Test Label: (Equivalent to ^K)
12
Print a Blank Label: (Equivalent to ^L)
20
Change baud rate: An EEPROM command
0
110 Baud
1
50 Baud
2
300 Baud
3
600 Baud
4
1200 Baud
5
2400 Baud
6
4800 Baud
7
9600 Baud
8
19200 Baud
21
Change SW1: Software dip switch #1. An EEPROM command. Below is the
^AB sequence:
12345678
^ABxxxxxxxx
*******.)
1=XON/XOFF Enable, 0=Disable
******.))
1=8 Data Bits, 0=7 Data Bits
*****.)))
1=Echo Enable, 0=Disable
****.))))
1=No Parity, 0=Enable Parity
***.)))))
1=Odd Parity, 0=Even Parity
**.))))))
1=Ignore Control Codes, 0=Accept
*.)))))))))),
.)))))))))),*
Enquiry Response
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent