Microcom 400 - Manual (Page 37)

Chapter 4 Designing Labels Using LDS
400 Operators Manual 29
FO FIELD ORIENTATION
This parameter defines the rotation of each field on the label. The point of rotation is
determined from the field justification.
0 0 degrees (normal rotation).
1 180 degrees (upside-down rotation).
2 270 degrees (right rotation).
3 90 degrees (left rotation).
FJ FIELD JUSTIFICATION
This parameter defines the justification of each field on the label.
0 Left justified above base-line.
1 Right justified above base-line.
2 Left justified below base-line.
3 Right justified below base-line.
4 Centered above base-line.
5 Centered below base-line.
Starting position definitions:
Table 6 shows how to obtain proper character placement relative to orientations and
justifications.
Character Starting Positions Relative to Field Orientations and Field Justifications
Rotation Field Orientation and Justification
0,180 Degrees 0 - Left justified above base-line
1 - Right justified above base-line
2 - Left justified below base-line
3 - Right justified below base-line
4 - Centered above base-line
5 - Centered below base-line
90,270 Degrees 0 - Left justified above base-line
1 - Right justified above base-line
2 - Left justified below base-line
3 - Right justified below base-line
4 - Centered on Y axis, right of X coordinate
5 - Centered on Y axis, left of X coordinate
Table 7