Microcom 400 - Manual (Page 31)

Chapter 4 Designing Labels Using LDS
400 Operators Manual 23
Print Speed
DPS VALUE MM PER SECOND INCHES PER SECOND INCHES PER MINUTE
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40 76.8
74.2
71.7
69.1
66.6
64.0
61.4
58.9
56.3
53.8
51.2
48.6
46.1
43.5
41.0
38.4 3.0
2.9
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.5 180
174
168
162
156
150
144
138
132
126
120
114
108
102
96
90
Table 4
LCB LABEL CONTROL BYTE
This parameter selects between the various gap detection methods.
Continuous Stock: If set to a value of 2, the printer will not activate the gap detector
circuit. After all fields are printed, the printer will advance the extra distance in the SPG
header element.
Normal Stock (leading edge): If set to a value of 0, the printer will detect the leading
edge of the label (the start of the next label).
Black Line Stock: If set to a value of 1, the printer will detect the leading edge of a black
line.
Blow Hole Stock (Slot-Cut): If set to a value of 0, the printer will detect the leading edge
of a blow hole (see software dip switch #4 (^D24) for blow hole stock).