Microcom 400 User Manual
Page 61
Chapter 5
Printer Commands
400 Operators Manual
53
Terminate the file with an escape character. Select the saved format and send the variable
data as normal. It may be the difference between sending a few lines of data versus the
entire format! Access is very fast.
To list a file that has previously been sent to the printer, use the ^AX^D54 command,
where ^AX denotes the file to be read. The printer will send the file to the serial port.
Sample files: File #1 initiates the save format file memory and downloads saved format file
#1. File #1 includes all the fixed data on the label. File #2 is the file that initiates processing
of file #1 and includes all variable data for the format. File #2 also prints the label. File #3
shows how a second saved format would look if the entire format was in one file.
NOTE:
File #1
^D1005
;Remember, send this string first time.
^A1^D595
^D575
4,288,193,5,19,30,0,1,1485
1,100,20,10,1,10,0,2,1,1,,15
1,210,20,7,1,10,0,2,2,2,,115
1,152,154,12,12,,0,2,2,100,,185
1,130,54,12,32,,0,2,2,2,,185
^D565
^D25
File #2
^A1^D585
24 PRINTS $ 3.79 204963403795
^D35