beautypg.com

Metz MECABLITZ 58 AF-2 digital Nikon User Manual

Page 142

background image

142

ķ

21 Wireless remote operation

Wireless remote operation is compatible with the Nikon Advanced Wireless

Lighting system. In this system, the exposure of one or more slave flash units is

controlled remotely by a master flash unit on the camera. The slave flash unit(s)

is/are triggered by wireless remote control by the secondary reflector of the

master flash unit. The light of the secondary reflector does not contribute to the

exposure of the shot in this case.
The slave flash unit is assigned to one of three possible groups (A, B or C). Each

of these groups may consist of one or more slave flash units. The flash modes

TTL or manual M can be set for each group separately on the master flash unit.
So that multiple remote systems in the same room do not interfere with one

another, there are four independent remote channels available. Master and sla-

ve flash units belonging to the same remote system must be set to the same

remote channel. The slave flash units must be able to receive the light from the

master flash unit with the integrated photo sensors.

Remote flash operation also supports second curtain synchronisation.
The secondary reflector is not supported by remote flash operation. In
remote flash mode the maximum flash range is not indicated on the flash
unit’s display panel.

21.1 Switching remote operation on and off

• Press the

key repeatedly until „Select“

appears on the display.

• Use the

and

keys to select „Remote“ from

the menu. The selected menu item will be highlighted

against a dark background.

• Press the

key to confirm the selection of

„Remote“.

• Use the

and

keys to select „Remote Master“

for master operation, „Remote Slave“

for sla-

ve operation, or „Remote OFF“ to deactivate remote

operation. The setting takes effect immediately.

• Press

repeatedly to return the display to its nor-

mal reading. If the

key is not pressed, the

display will switch back to normal automatically after

approximately 5 seconds.

ĭ

İ

Set

ĭ

İ

Sel

Para

Sel

CH1

TTL

AZoom 28

TTL+

1

/

3

F32

B

A

M

Select

BEEP

FB

Remote

İ

ĭ

Set

Remote

Master

İ

ĭ

Set

709 47 0159.A1 58AF-2 Ni Print 26.07.2010 14:13 Uhr Seite 142