Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 173)

173
k
11 OPTION menu
11.1 Modelling light
The modelling light is a high-frequency stro-
boscopic flash. It creates the impression of a
semi-permanent light for a duration of about
3 seconds. The modelling light enables the
user to assess light distribution and the for-
mation of shadows before taking pictures.
The modelling light is triggered with the
manual firing button ቧ.
Setting procedure
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "MOD.LIGHT".
• Press the sensor button on the
touch display.
• Press the or sensor button on
the touch display and switch the modelling
light on or off. The setting is adopted
immediately.
After activation of the modelling light,
"MOD.LIGHT" appears in the INFO menu.
MOD. LIGHT
OFF ON
OPTION
11.2 Zoom Mode
11.2.1 Extended Zoom Mode
In extended zoom mode the zoom position of
the reflector is reduced to one level below
the focal length of the camera lens. The
resulting expanded and broader light covera-
ge provides additional dispersed light (reflec-
tions) inside rooms so that a softer flash illu-
mination is possible.
Example:
The focal length of the camera lens is 50 mm.
The extended zoom mode sets a 35 mm
reflector position on the flash unit. However,
50 mm continues to be shown on the display.
Setting procedure
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select „ZOOM MODE”.
• Press the button as often as it
takes for the selection menu to appear.
ZOOM MODE
OPTION
Off
MOD.LIGHT
On
STANDBY
MOD.LIGHT
AF BEAM
ZOOM SIZE
ZOOM MODE
STANDBY