Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 168)

168
k
10.2.1 Remote slave flash mode settings
• Switch on the flash unit with the
ባ
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last (e.g.
M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select "SLAVE".
• Press the sensor button on the
touch display. Remote slave mode is set.
In addition, the selected slave group (e.g. A)
and the remote channel (e.g. CH 1) are dis-
played.
SLAVE
10.2.2 Setting the slave channel
• Press the sensor button on the touch
display for the channel group (e.g.
). The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
A I CH1
MASTER
SLAVE
SERVO
MASTER
SLAVE
SERVO
REMOTE SLAVE
INFO EV
Z OOM 35 mm
A CH 1
REMOTE SLAVE
INFO EV
Z OOM 35 mm
A CH 1
E TTL
INFO EV
+ 1 1/3
0,3 -3,5 m
Z OOM 35 F4.0 m
m
1
3
1 CH
A GROUP