Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 167)

167
k
10.1.6 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "CHANNEL".
• Press the sensor button on the
touch display.
• Press the sensor button on the touch
display for the desired channel.
The setting will take effect immediately.
CHANNEL
PARA
10.2 Remote slave flash mode
The flash unit supports Canon`s wireless
E TTL Remote System in slave flash mode.
At the same time, one or more slave flash
units can be remotely controlled from one
master flash unit on the camera (e.g. mecab-
litz 52 AF-1 C digital).
A slave flash unit can be assigned to one of
three possible slave groups (GROUP A, B or
C). The master flash unit can control all of
these slave groups simultaneously and at the
same time take the settings for each slave
group into account.
So that multiple remote systems in the same
room do not interfere with one another, there
are four independent remote channels avai-
lable (CH 1, 2, 3 or 4).
Master and slave flash units belonging to the
same remote system must be set to the same
remote channel. The slave flash units must
be able to receive the light from the master
flash unit with the integrated sensors for the
remote mode .
Depending on the camera model, the came-
ra’s internal flash unit can also function as
master flash unit. Please consult the respec-
tive camera operating instructions for further
tips on setting the master flash unit.
RATIO
CHANNEL
MASTER
1
2 CH
3