Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 163)

163
k
10.1 Remote master mode settings
Slave groups A and B are always activated.
They cannot be deactivated. The master flash
unit and slave group C can be activated or
deactivated, however. If the master flash unit
is deactivated, it only controls the slave units
and does not contribute to exposing the
shot.
10.1.1 Remote master mode settings
• Switch on the flash unit with the
ባ
button. The start screen appears.
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the
touch display. Remote master mode is set.
Remote master mode is shown in the picture.
The master itself has no influence on exposu-
re (REMOTE MASTER Off) and no lighting con-
ditions (RATIO) are set.
MASTER
MASTER
If the master is supposed to help with the
exposure, then:
• Press sensor button
on the touch
display for the flash mode until the selecti-
on for the master flash unit appears.
• Press the sensor button on the
touch display.
• Press the sensor button on the touch
display.
The setting is adopted immediately.
Remote master mode is shown in the picture.
The master emits a flash and contributes to
the exposure (REMOTE MASTER). No lighting
conditions (RATIO) are set.
E TTL
On / Off
ON
M
MASTER
SLAVE
E TTL
INFO EV
+ 1 1/3
0,3 -3,5 m
Z OOM 35 F4.0 m
m
REMOTE
MASTER OFF
INFO A+B+C
RATIO Off
E TTL
REMOTE MASTER
INFO A+B+C
RATIO Off
E TTL
Off
MASTER
On
On / Off
MASTER
MODE
EV
REMOTE MASTER
INFO A+B+C
RATIO Off
E TTL