Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 159)

159
k
9.1 Motor zoom reflector („Zoom“)
The motor zoom reflector of the flash unit
can illuminate lens angles from 24 mm (35
mm format).
Thanks to the use of the integrated wide-
angle diffuser ቪ, the illumination widens to
12 mm.
Auto zoom.
The zoom position of the reflector is automa-
tically adjusted to the lens focal length when
the flash unit is used with a camera that
transmits the data related to the lens focal
length. After the flash unit has been switched
on, „Zoom“ and the current zoom position of
the reflector are shown in the display.
Automatic adjustment occurs for lens focal
lengths from 24 mm.
The automatic adjustment will not be activat-
ed if the reflector is swivelled, if the wide-
angle diffuser ቪ is pulled out, or a
Mecabounce (accessory) is mounted.
If so desired, the position of the reflector can
be manually adjusted in order to achieve par-
ticular lighting effects (such as spot effect
etc.). Manual zoom mode
The zoom position of the reflector must be
adjusted manually to the lens focal length
when used with a camera that doesnít trans-
mit the data related to the lens focal length.
In this case auto-zoom mode is not possible!
After switching on the flash unit, „Zoom“
appears in the display and the current zoom
position of the reflector appears.
Setting procedure
• Press the
ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "Zoom".
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select the desired zoom
value.
After around 10 seconds, the operation
display appears, or press the
ቨ button
repeatedly until the operation display
appears. The following zoom positions are
possible for the reflector:
24 - 28 - 35 - 50 - 70 - 85 - 105 mm
(35 mm format).
Zoom
PARA
☞
EV
ZOOM
50
70
85