Metz MECABLITZ 52 AF-1 digital Canon User Manual
Page 166
166
k
10.1.4.2 Exposure correction (EV) for flash
group C settings on the master
flash unit
Set the lighting conditions to xx as described
in 10.1.4
.
• If an exposure correction value (EV) is to be
set for slave flash group C, then press sen-
sor button
on the touch display.
• Press the
sensor button on the touch
display.
• Use the sensor buttons
to set an
exposure correction value (EV) (e.g. +2/3).
• Press the
sensor button on the touch
display.
The setting is adopted immediately.
Slave flash group C is usually required to illu-
minate the background in order to prevent
shadows from forming.
A:BIC
A:BIC
+2/3
10.1.5 Partial light output (M) in M-mode
settings on the master flash unit
Set the mode to
as described in 10.1.2.
• Press the
sensor buttons on the touch
display as many times as it takes for the
partial light output setting to appear.
• Press the sensor button on the touch
display for which a partial light output is to
be set (in the example, a partial light out-
put of 1/16 is to be set for slave group A).
• Press the
sensor buttons on the
touch display to set the desired partial light
output.
• Press the sensor button of the selected par-
tial light output
on the touch display.
The setting is adopted automatically.
M
A:B:C
1/16
1 : 4
A:B
C
1 : 4
+2/3
A:B
C
REMOTE
MASTER
INFO
A:B C
A : B
C
1 : 4
E TTL
+ 1
REMOTE
MASTER
INFO
A:B C
A : B
C
1 : 4
+2/3
E TTL
+ 1
+
1/3
+
2/3
+ 1
REMOTE
MASTER
INFO
A:B:C
A
1/1
B
1/1
C
1/1
M
1/1
1/1
1/1
A
B
C
1/1
1/16
1/1
A
B
C
1/1
1/8
-2
/
3
1/16
1/16
-1
/
3
1/8
-2
/
3
1/16
1/16
-1
/
3