Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 153)

153
k
Range display in manual flash mode M
In manual flash mode , the distance that
must be maintained from the subject for
correct flash exposure is indicated.
Adjustment to the photographic situation at
hand can be achieved by, for example,
changing the aperture setting on the lens or
selecting a manual partial light output level
(see 7.3).
Exceeding the display range
Flash ranges of up to 99 m or 99 ft can be
shown in the display.
This display range can be exceeded in the
case of high ISO values and large aperture
openings.
An arrow or triangle after the distance value
indicates that the display range has been
exceeded. 6 Displays in the camera viewfinder
Examples for the camera viewfinder display:
Flash symbol flashes:
Command to switch on or use the flash unit
(by some cameras).
Flash symbol is illuminated:
The flash unit is ready for use (by some
cameras). The viewfinder in some cameras
features an incorrect exposure warning
function:
the viewfinderís display for aperture value,
shutter speed (or both) flashes by over or
underexposure.
Incorrect exposure guidelines:
• overexposure: do not use the flash!
• underexposure: switch the flash on or use a
tripod and a longer exposure time.
Reasons for incorrect exposure can lay in the
various exposure and automatic program-
mes.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera’s operating instructions.
M
INFO 1/1
4.4 m
Z OOM 35 F4.0 m
m
E TTL
INFO EV
9,0 -99 m
Z OOM 35 F1.0 m
m