Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 160)

160
k
Tip:
If you do not necessarily need the full guide
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens.
This will provide full light coverage of the pic-
ture and eliminate the need to continually
adjust it to the focal length of the lens.
Example:
You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.
Resetting to auto-zoom
• Touch the shutter release to begin a data
transfer between the flash unit and the
camera.
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "Zoom".
• Press the sensor button on the
touch display.
• Press the sensor buttons on the touch
display and select .
After around 10 seconds, the operation
display appears, or press the
ቨ button
repeatedly until the operation display
appears.
Zoom
A.Zoom
PARA
EV
ZOOM
A.Zoom
24