Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 164)

164
k
10.1.2 Setting the flash mode on the master
flash unit
• Press sensor button or on the
touch display for the flash mode until the
selection for the master flash unit appears.
• Press the sensor button on the
touch display.
• Use the sensor buttons to set
the mode to "E TTL" or "M".
• Press the sensor button on the touch
display for the desired mode of operation
or alternatively .
The set mode of operation is adopted
immediately.
M E TTL
MODE
E TTL M
10.1.3 Exposure correction (EV) in E TTL mode
settings on the master flash unit
• Press sensor button on the touch
display for the flash mode until the selecti-
on for the master flash unit appears.
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
E TTL
EV
+1
On / Off
MASTER
MODE
EV
On / Off
MASTER
MODE
EV
+ 2/3
+ 1
+ 1 1/3
REMOTE MASTER
INFO A+B+C
RATIO Off
E TTL
REMOTE MASTER
INFO A+B+C
A 1/1
B 1/1 C 1/1
M 1/1
REMOTE MASTER
INFO A+B+C
RATIO Off
E TTL
REMOTE MASTER
INFO A+B+C
RATIO Off
E TTL +1
E TTL
M