Metz MECABLITZ 52 AF-1 digital Canon - Manual (Page 172)

172
k
Setting procedure for the learn function
The AF pre-flash function of the camera must
be switched off.
• Press the sensor buttons on the
touch display as many times as it takes for
the selection to appear.
• Press the sensor button on the touch
display.
• "Learning Mode" is ready to learn.
• Press the release button on the camera so
that the camera’s own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.
The macablitz 52 AF-1 digital has learned the
flash of the camera flash unit.
SYNC
Learn
10.4.5 Switching-off SERVO flash mode
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation, e.g
.
• Press the sensor button on the touch
display for the mode of operation, e.g
.
The selected mode of operation is adopted.
E TTL
E TTL
INFO P
M-SERVO
Z OOM 35 mm
SYNC
SYNC
Learn
INFO 1/16
M-SERVO
Z OOM 35 mm
SYNC
SLAVE
SERVO
E TTL
E TTL HSS