Metz MECABLITZ 15 MS-1 digital - Manual (Page 83)

83
ķ
11 Modelling Light (ML)
The modelling light (setting light) is a
high frequency, stroboscopic flash
light. The effect of a quasi continuous
light is created for a duration of
approx. 2 seconds. The setting light
can be used to assess the light distri-
bution and shadow formation before
taking a picture.
Activating the modelling light
• Switch-on flash unit with the main
switch ቢ .
• Keep the button “AF/SELECT” ቤ
pressed until the following message
appears in the display:
• Press the button on the flash
unit. In the display appears:
• Switch-on (ON) the “MODELLING
LIGHT” function with the button
• Press button and the “Modelling
Light” function is switched to the
preset operating mode.
OK
Ī
S E L
• As a confirmation that the
“Modelling Light” is switched on,
the manual release button
ብ blinks.
Triggering modelling light
Press the manual release button
ብ to
trigger the modelling light.
The modelling light is generated
according to the possibly set ratio of
the reflectors (Ratio).
Deactivating modelling light
• Keep the button “AF/SELECT” ቤ
pressed until the following message
appears in the display:
• Press the button on the flash
unit. In the display appears:
• Switch-off (OFF) the “MODELLING
LIGHT” function with the button .
• Press the button and the model-
ling light function is deactivated.
OK
Ī
S E L
S E L Ī
S E L E C T
⊃
̇
15MS-1
V 1 . 0
S E L Ī OK
M O D E L L I N G
L I G H T
O F F O N
S E L Ī OK
M O D E L L I N G
L I G H T
O F F O N
☛
S E L Ī
S E L E C T
⊃
̇
S E L Ī OK
M O D E L L I N G
L I G H T
O F F O N
S E L Ī OK
M O D E L L I N G
L I G H T
O F F O N
708 47 0018.A3 15 MS-1 01.04.2010 9:56 Uhr Seite 83