Measurement Computing CB-7080 - Manual (Page 57)

CB-7080 & CB-7080D Counter/Timer User's Guide @AAEAN
2-39
@AAEAN
Description : Enable the counter alarm (for alarm-mode 0). Refer to " Counter alarm mode selection " for more
information.
Syntax : @AAEAN[chk](cr)
@ A delimiter character
AA 2-character HEX module address, from 00 to FF
EA
N=0 Enable counter 0
N=1 Enable counter 1
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response :
Valid response !AA[chk](cr)
Invalid response ?AA[chk](cr)
no response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Examples :
Enable counter 0:
command: @01EA0(cr)
response: !01(cr)
Enable counter 1:
command: @01EA1(cr)
response: !02(cr)