Measurement Computing CB-7080 - Manual (Page 41)

CB-7080 & CB-7080D Counter/Timer User's Guide $AA5NS
2-23
$AA5NS
Description : Set the counter status
Syntax : $AA5NS[chk](cr)
$ A delimiter character
AA 2-character HEX module address, from 00 to FF
N=0 counter 0
N=1 counter 1
S=0 stop counter
S=1 start counter
[chk 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response :
Valid response !AA[chk](cr)
Invalid response ?AA[chk](cr)
no response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Examples :
Stop counter 0:
command: $01500(cr)
response: !01(cr)
Start counter 1:
command: $01511(cr)
response: !01(cr)