Measurement Computing CB-7080 - Manual (Page 17)

CB-7080 & CB-7080D Counter/Timer User's Guide General syntax format
2-3
Command Response Description Reference
$AA1L !AA(data) Read the low trigger level Page 2-15
$AA1L(data) !AA Set the low trigger level Page 2-16
$AA3N !AA(data) Read the max. counter value Page 2-18
$AA3N(data) !AA Set the max. counter value Page 2-19
$AA4 !AAS Read the filter status Page 2-20
$AA4S !AA Set the filter status Page 2-21
$AA5N !AAS Read the counter status Page 2-22
$AA5NS !AA Set the counter status Page 2-23
$AA6N !AA Reset the counter Page 2-24
$AA7N !AAS Read the overflow status Page 2-25
$AAG !AAG Read the gate mode Page 2-29
$AAAG !AA Set the gate mode Page 2-30
$AAB !AAS Read the input mode Page 2-31
$AABS !AA Set the input mode Page 2-32
@AADI !AAS0D00 Read the D/O and alarm state Page 2-36
@AADO0D !AA Set the D/O value Page 2-38
@AAGN !AA(data) Read the preset value Page 2-44
@AAPN(data) !AA Set the preset value Page 2-45
Alarm mode 0 commands
Table 2-4. Alarm-mode 0 Command Set
Command Response Description Reference
@AAEAN !AA Enable the alarm Page 2-39
@AADAN !AA Disable the alarm Page 2-43
@AAPA(data) !AA Set the counter 0 alarm value Page 2-46
@AASA(data) !AA Set the counter 1 alarm value Page 2-48
@AARP !AA Read the counter 0 alarm value Page 2-50
@AARA !AA Read the counter 0 alarm value Page 2-52
Alarm mode 1 commands
Table 2-5. Alarm-mode 1 Command Set
Command Response Description Reference
@AAEAT !AA Enable the alarm Page 2-40
@AACA !AA Clear the latch alarm Page 2-41
@AADA !AA Disable the alarm Page 2-42
@AAPA(data) !AA Set the Hi-alarm value Page 2-46
@AASA(data) !AA Set the Hi-Hi-alarm value Page 2-48
@AARP !AA Read the Hi-alarm value Page 2-51
@AARA !AA Read the Hi-Hi-alarm value Page 2-53
LED commands
Table 2-6. LED Command Set
Command Response Description Reference
$AA8 !AAS Read LED configuration Page 2-26
$AA8V !AA Set LED configuration Page 2-27
$AA9(data) !AA Send data to LED Page 2-28