Connectors, cables – interface i/o connectors, Connectors, cables – interface i/o connectors -3, Table 2-1 – Measurement Computing 6K-SSR-RACK08 User Manual
Page 12

6K-SSR-RACK08 User's Guide
Installing the 6K-SSR-RACK08
Caution!
Connect the 6K-SSR-RACK08 to a PCI-DAS6000 Series board or to a PCI-DAC6700 Series board
only. Connecting to a board that is not supported by the 6K-SSR-RACK08 can damage both boards.
Connectors, cables – interface I/O connectors
The 6K-SSR-RACK08 board’s eight SSR modules are controlled by your 6000 Series control board’s digital
channels DIO<0:7> through AUXPORT. Connect your signal cable from the 6000 Series control board’s
interface connector to one of the interface connectors on the 6K-SSR-RACK08 board.
The 6K-SSR-RACK08 has two 100-pin interface connectors labeled
P11
and
P12
, and two 50-pin interface
connectors labeled
P9
and
P10
. Signals pass through each connector. Only connect one of the four interface
connectors to your 6000 Series control board.
Daisy chaining to other 6K-SSR-RACK08 boards
Do not daisy chain additional 6K-SSR-RACK08 boards to the extra interface connectors, since any additional
boards would be controlled with the same DIO lines.
Table 2-1. Board connectors, compatible cables and hardware
lists the board connectors, compatible cables, and compatible MCC hardware for the 6K-SSR-
RACK08.
Connector type
P11 and P12: Shielded, SCSI 100-pin D-type
P9 and P10: Unshielded 50 pin ribbon connector
Compatible cable
(connect to P11 or P12)
C100MMS-x shielded round cable. (see Figure 2-1). x = 1, 2 or 3 meters
Compatible cable
(connect to P9 or P10)
C100HD50-x unshielded ribbon cable (see Figure 2-2). x = 3 or 6 feet
C50FF-x unshielded ribbon cable (see Figure 2-3)
x = 1, 2, 3, 4, 5, 10, 15, 20, 25 or 50 feet
Note: These cables do not provide power to the 6K-SSR-RACK08. External power is
required.
PCI-DAS6000 Series analog input boards:
PCI-DAS6013
PCI-DAS6014
PCI-DAS6030
PCI-DAS6031
PCI-DAS6032
PCI-DAS6033
PCI-DAS6034
PCI-DAS6035
PCI-DAS6036
PCI-DAS6052
PCI-DAS6023
PCI-DAS6025
PCI-DAS6040
PCI-DAS6070
PCI-DAS6071
Compatible MCC hardware
PCI-DAC6700 Series analog output boards:
PCI-DAC6702
PCI-DAC6703
2-3