Mathey Dearman CNC Saddle Machine User Manual

Page 35

Text mode
Original mode

CNC Saddle Machine Parts & Operating Manual 03-0117-MSA 03-0117-1SA 03-0117-2SA

Ver 1.0

5.6.12 Recheck all hex nuts to make sure they are tight.

5.6.13 The machine is now ready to run.

NOTE: The calibration process must be completed each time the CNC machine is powered on.

NOTE: The MatheyCNC software must be properly installed, user registered, and software activated
(See Section 6) in order to operate the CNC machine.