Dish Network 942 - Manual (Page 93)

Chapter 10
86
Controlling Other Components
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons control the TV
volume. However, if you want to use the AUX mode to control a tuner or amplifier and the
device has a volume setting, you can set up the remote to control the device’s volume
instead of the TV volume. Be sure to set up the remote to control a device in AUX mode
before using this feature.
To set the remote to control the device’s volume:
1
Press and hold AUX for four seconds, and then let go of it. AUX will blink.
2
Press POUND (#).
3
Press the plus (+) side of VOLUME.
4
Press ZERO (0).
5
Press POUND (#). AUX flashes three times.
6
Press SAT.
7
Press the plus (+) and minus (-) sides of VOLUME. The device’s volume changes and
AUX lights instead of TV.
To set the remote back to control the TV volume :
1
Press TV for four seconds, and then let go of it. TV will blink.
2
Press POUND (#).
3
Press the plus (+) side of VOLUME.
Chapter 10 Two Color.fm Page 86 Tuesday, June 7, 2005 1:17 PM