K-Patents PR-23 for K-Patents - Manual (Page 42)

Document/Revision No. IM-GB-PR23-ACP: Rev. 1.0 Effective: December 15, 2011
42
Appendix to the Instructions Manual PR-23
7.9 Ethernet connection
Description of requirements
Ethernet connections and wiring have been connected and set up in accordance with the the
PROCESS REFRACTOMETER PR-23 INSTRUCTION MANUAL
Section 12.
Requirement acceptance values
The Ethernet connections comply with the the PROCESS REFRACTOMETER PR-23
INSTRUCTION MANUAL
Section 12.
Date Signature Pass
*
Conditional Pass Fail
*Conditional pass:
7.10 Initial check and switching the device on
Description of requirements
The initial check has been performed and the electrical power has been connected in
accordance with the PROCESS REFRACTOMETER PR-23 INSTRUCTION MANUAL
Section 5.1.1.
Requirement values
The corresponding screen displays occur in accordance with the PROCESS
REFRACTOMETER PR-23 INSTRUCTION MANUAL
Section 5.1.1.
Failure to meet acceptance values
Terminate the IQ.
Date Signature Pass
*
Conditional Pass Fail
*Conditional pass: