K-Patents PR-23 for K-Patents - Manual (Page 17)

The Pharma Refractometer PR-23-AC with Laboratory Test Cuvette LTC
2
© Copyright K-Patents 2011. All rights reserved.
17
2.11 Indicating Transmitter DTR assembly for use
in Laboratory
Attaching laboratory stand to DTR
Unlock and open the DTR cabinet door, then unscrew the retaining screw for the keypad
panel and open the panel. The supplied screws (M5x10 A2 DIN 912) for attaching the stand
are inserted from the inside through the top two holes located at the back of the cabinet.
These are aligned and screwed into the threaded attachment points located at the top of the
stand. The enclosure can now be used as a free standing tabletop unit, see Figure 2.7.
1
Figure 2.7 Attaching the laboratory table top stand to the Transmitter for use in the laboratory.